SPC (Stone Plastic Composite): Rigid core made of 60% limestone. Extremely dense, dent-resistant, and temperature stable.

WPC (Wood Plastic Composite): Core made of wood flour and foaming agents for a softer, quieter feel underfoot.

Visuals & Textures: HD photographic imaging with Embossed in Register (EIR) matching grain texture to imagery, with beveled or square edge options.

Wear Layers: 6–12 mil (low-traffic residential), 20 mil (active homes/kids/pets), 22–30+ mil (heavy commercial).

Installation: Click-Lock (Floating over existing floors) or Glue-Down (Best for high traffic/rolling loads).

• Routine: Sweep dry debris first; mop with neutral pH cleaner (e.g., Zep or Rejuvenate).
• Avoid: Steam mops, wax/polishes, steel wool, or harsh ammonia products.
• Protection: Use felt pads on furniture legs and unbacked entry mats (avoid rubber-backed mats).

Solid Hardwood: Milled from a single 100% solid piece of continuous timber (typically 3/4" thick) using traditional tongue-and-groove construction. Hand-stained and sealed with 2 to 4 coats of oil-based or water-based polyurethane protective finish.

Engineered Hardwood: Built with a real wood top veneer permanently bonded over a stable multi-ply cross-core. Prevents warping, cupping, and swelling from humidity shifts. Factory pre-finished with high-durability coatings (aluminum oxide / UV-cured urethane).

Solid: Boosts long-term property value for custom builds; sensitive to humidity and light.

Engineered: Accommodates wider plank profiles with superior structural stability. Factory pre-finishing eliminates on-site dust, fumes, and extended drying times.

• Sweep/vacuum using a soft-bristle head (no beater bar).
• Clean using a microfiber mop with a pH-neutral hardwood cleaner.
• Avoid standing water, liquid pooling along seams, and steam mops.

Fibers: High-performance Polyester, resilient Nylon, or eco-friendly Triexta.

Care: Vacuum 1–2 times weekly with adjustable pile height. Professional hot-water extraction (steam cleaning) every 12–18 months. Blot spills immediately—never scrub.

Kiln-fired clay, natural minerals, and sand engineered for zero-moisture absorption and high durability (including realistic wood-look planks).

Beyond Floors: Specialist installation available for custom kitchen backsplashes, decorative walls, and complete bathroom/shower enclosures.

• Commercial Grade: Antimicrobial protection, frost/chemical/stain resistance, and high-moisture waterproofing.
• Care: Routine sweeping and warm water wiping with neutral tile cleaners. Periodically seal cementitious grout lines.